





2pcs/4pcs LED Logo Car Door Welcome Lights for Infiniti G37, G25, G35, Q60, Q40, Q50, Q70, QX70, M, EX, FX
Count
Customer Reviews
Choose options
Count
Customer Reviews
Count
Customer Reviews
Enhance your vehicle’s style with LED Logo Car Door Welcome Lights, projecting the Infiniti logo when you open the door. These lights add a premium look and feel, setting your ride apart.
Available Options:
• 2pcs Set
• 4pcs Set
Application:
• 2007-up Infiniti G25, G35, G37 Sedan
• 2008-up Infiniti G37, Q60 Coupe/Convertible
• 2014-up Infiniti Q50 Sedan
• 2011-up Infiniti M37, M56, M25, M35, Q70
• 2008-up Infiniti EX35, EX37, EX25, QX50
• 2009-up Infiniti FX35, FX37, FX50, QX70
• 2011-up Infiniti QX56, QX80, QX50, QX70
Specifications:
• Working Voltage: 12V
• Output Work Rate: 5W
• Length: 8.4 cm
• Width: 2.8 cm
• Work Environment Temperature: -40°C ~ 105°C
• Special Features: Laser light, door lights, welcome light
Package Includes:
• 2pcs or 4pcs Car Logo Door Lights
Order now at MyVQParts.com and choose between 2pcs or 4pcs sets!
Frequently Asked Questions
What vehicles is this compatible with?
Compatible with: G35, G37, Q50, Q60, Q40, Q70, FX35, FX37, FX50, QX70, QX80, M25, M35, M37. Contact us at support@myvqparts.com after ordering if you need fitment confirmation.
Is this a plug-and-play LED installation?
Yes, most of our LED products are plug-and-play with no splicing required. They use your vehicle's existing connectors for easy installation.
Will this LED cause a hyper flash issue?
Some LED turn signal replacements may cause hyper flash. A load resistor or LED-compatible flasher relay (sold separately) may be needed. Check the product description for details.
What is your shipping and return policy?
We offer fast shipping on all orders. Free shipping on all orders — no minimum. Returns accepted within 30 days for unused items in original packaging. Visit MyVQParts for full policy details.
How to Install: 2pcs/4pcs LED Logo Car Door Welcome Lights for Infiniti G37, G25, G35, Q60, Q40, Q50, Q70, QX70, M, EX, FX
- Clean the emblem mounting area thoroughly with isopropyl alcohol.
- Remove the factory emblem using a heat gun or hair dryer (60–90 seconds on low heat) to soften the adhesive, then use a plastic trim tool or dental floss to carefully release it.
- Clean off any remaining adhesive residue.
- Connect the LED emblem wiring harness — most plug directly into the factory emblem connector or a nearby 12V source (see included instructions for your specific model).
- Test the emblem function before final installation.
- Peel the backing from the 3M tape and press the emblem firmly into position.
- Hold for 60 seconds. Avoid washing the area for 24 hours.
Questions? Email us at support@myvqparts.com or visit our contact page.

